...

Safe Start is live: a free 50-minute e-bike safety course, open to everyone. Get started

Bafang E-Bike Error 25: How to Fix It

Written by: Chris Van Leuven | November 15, 2026 | Time to read: 5-6 min

Bafang Error 25 means a torque sensor signal fault. Learn what causes it, how to check wiring and connections, and when to contact a mechanic.

More about the Author: Chris Van Leuven

Chris is a writer, climber, and founder of Yosemite E-Biking in Mariposa, CA. When he’s not tackling Sierra Foothills trails or scaling rock walls, he’s crafting adventure stories with his boxer, Fenster. His work has appeared in Outside, Men’s Journal, Gripped, and Best American Sports Writing.

an aventon aventure fat tire electric bike in the sierra foothills. photo: yosemiteebiking.com
Torque sensors and cadence sensors. Let me tell you how differently they feel when riding. For years, I rode cadence-sensing e-Bikes. The power comes on at a fairly consistent level once you start pedaling. There’s sometimes a delay, especially with older rear-hub motors, but when the assist kicks in, it’s, well, a lot! Hills become easier, and you don’t necessarily have to push much harder to get more assistance. Then there’s the torque sensor, which feels a lot different.

I guide a lot of tours on an Aventon Abound, often loaded with piles of spare batteries, and my legs get more sore. When I put clients on one of our torque-sensing e-Bikes, like a newer Aventon Aventure or the Abound, I tell them, “You’ll be getting a workout!”

With a torque sensor, I have to work a little harder on the climbs. Sure, I can crank up the assist, but when I'm guiding back-to-back tours and riding 60-plus miles in a day, I definitely feel it! For more on how these systems work, check out Upway’s torque sensor vs. cadence sensor comparison.

Now, onto Bafang Error 25. This error code indicates a torque sensor signal fault, meaning the controller isn’t receiving the information it needs to determine how hard you’re pushing on the pedals.

In this blog, I’ll explain what causes Bafang Error 25, how to troubleshoot the problem, and when it’s time to call a mechanic. For more general troubleshooting advice, check out Upway’s electric bike repair guide.

👋  Welcome to Upway!

Upway is your top destination for buying and selling e-Bikes online. Discover your next e-Bike at up to 60% off retail prices, available in new or like-new condition.



What Does Bafang Error 25 Mean?

gavin brennan, owner of ebiketoursla.com getting on an aventon aventure fat tire bike in los angeles. photo: yosemiteebiking.com


A torque sensor measures how much force you’re applying to the pedals, and the controller uses that information to adjust the motor’s power output. When Bafang Error 25 appears, it means there’s a problem with that signal. The controller can’t get a valid reading, and the motor may stop providing assistance altogether.


You might notice that pedal assist isn’t working, or the display may show Error Code 25 when you turn on the e-Bike or start pedaling. One important thing to keep in mind: Popular conversion motors like the BBS02 and BBSHD use cadence-based pedal assistance rather than torque sensing, so Error 25 isn’t associated with those setups.


Also, don’t confuse Bafang Error 25 with a brake sensor fault. Some other e-Bike brands use Error Code 25 for problems with the brake lever or motor cutoff sensor. On the Bafang systems covered here, Error 25 refers to the torque signal.


For other warnings involving the motor, battery, display, or controller, see Upway’s Bafang error codes list.

What Causes Bafang Error 25?

The first thing to remember is that the torque sensor isn’t necessarily broken. Sometimes the problem is somewhere between the sensor and the controller. A loose connection, damaged cable, or moisture inside an electrical connector can interrupt the torque signal. But there’s also the possibility of a faulty sensor or a controller that isn’t reading the information correctly.


I’ve had cables left under tension after visits to my local bike shop. I’ve also had connections pop free after a bike fell over or took a light crash. Sometimes the fix is as simple as plugging something back in. Things happen on bikes. They’re bikes, after all! And where I ride in the Sierra foothills near Yosemite, the terrain is rough but oh-so-gorgeous.


an aventon aventure fat tire electric bike with the los angeles skyline in the background. photo: yosemiteebiking.com


How to Fix Bafang Error 25

So, how do you fix Error 25 on a Bafang e-Bike?


Before ordering replacement parts, start with a few basic checks:


  • Restart your e-Bike. Turn off the power, wait about 30 seconds, and restart the system. See if Error 25 returns.
  • Inspect the wiring and connections. With the bike powered off, look for loose plugs, bent pins, pinched cables, or damaged insulation around accessible motor and torque sensor connections.
  • Check for moisture or corrosion. If you've recently ridden in heavy rain or washed your e-Bike, inspect accessible connectors for water, dirt, or corrosion. Let wet components dry before reconnecting them.
  • Think about recent repairs. Did the error appear after a component replacement, firmware update, or visit to the bike shop? That could help explain what's happening.


a woman on an aventon aventure fat tire e-bike in the sierra foothills. Photo yosemiteebking.com


For more troubleshooting advice, Upway’s guide to fixing pedal assist on an e-Bike covers other reasons your motor might not be responding. If none of those checks solve the problem, it’s probably time to contact a Bafang dealer or your e-Bike mechanic.

💸 Want to know exactly how much your e-Bike is worth? 🚲

  • Get a free estimate built on 100,000+ real sales and expert technical diagnostics.
  • Use the Upway Value Estimate tool to find out in mere seconds!

When to Contact a Bafang Dealer

So you’ve gone through the steps above and, bam! Error 25 is still there. But before you call the shop, note your motor and display models. And try to remember when the error first showed up. Was it right when you turned the bike on? Halfway through a ride? After getting caught in the rain? The more you can tell your mechanic, the better.


I guide e-Bike tours, but I'm no mechanic. I call my shop all the time, sometimes right from the side of the road. I also bring the bikes in for regular safety checks, and if I'm taking one in, I'll often throw a second bike on the rack and have them look at that one, too.


It's a 45-minute drive to my bike shop, so I bring my laptop and knock out some writing while I'm there. I always hope they'll finish the repairs that day, but sometimes they have to order parts. Then I'm looking at another long drive to pick up the bike. But my mechanics know who to call, what questions to ask, and how to handle the repair logistics. I focus on the tours. May as well do what we do best, right?

three riders on aventon aventure fat tire electric bikes, with one on a cargo bike, in the sierra foothills, california. photo: yosemiteebiking.com

Bafang-Powered E-Bikes From Upway!

If your e-Bike has other issues, such as intermittent power loss or a motor that keeps cutting out, Upway’s guide to why your e-Bike motor isn’t working or keeps cutting out covers other possible problems.


And if you're tired of dealing with repairs on an aging e-Bike, maybe it's time for something newer!


Upway sells certified pre-owned e-Bikes and regular pedal bikes from leading brands at up to 60% off! Plus, every e-Bike goes through a professional inspection and reconditioning process, with mechanics checking the battery, motor, brakes, drivetrain, and other components before it's listed for sale. Upway also includes a one-year warranty and a 14-day return policy, so you can buy with confidence!


Frequently Asked Questions

What is Bafang Error 25?

Bafang Error 25 is a torque sensor signal fault. It means the controller isn’t receiving valid information about your pedaling force, which can cause motor assistance to stop working.

Can I ride my e-Bike with Bafang Error 25?

You may still be able to pedal without motor assistance, provided the bike is otherwise mechanically safe. However, don’t rely on the motor working normally until the problem has been diagnosed. If the bike has other electrical or mechanical problems, stop riding and have it inspected.

Does Bafang Error 25 mean I need a new torque sensor?

Maybe, but don't buy one just yet. I've had enough loose connections on my own e-Bikes to know that sometimes the problem is a lot simpler than you'd think. Check the wiring first, and if nothing looks out of place, have a mechanic take a look.


Key Takeaways


  1. Bafang Error 25 means there's a problem with the torque sensor signal. Your motor may stop helping when you pedal.
  2. Check the connections before buying parts. A loose plug, damaged wire, or moisture could be all that's causing the trouble.
  3. Still seeing Error 25? Have a Bafang dealer diagnose the sensor and controller before buying replacement parts.




There is more to Explore

Visit below articles for more info about electric bikes 

a Ride1Up TrailRush hardtail electric mountain bike

Ride1Up TrailRush E-Bike Review

a a Ride1Up Prodigy step through E-Bike

Ride1Up Prodigy E-Bike Review: Brose Mid-Drive Power

a man riding an aventon fat tire electric bike through a puddle

Why Your E-Bike Shuts Down While Riding and How to Fix It