The Pedego Ridge Rider can absolutely be classified as a mountain bike. It has a suspension fork and MTB geometry, but the classification applies more to the first generation before it evolved into a utility commuter with off-road capability.
Pedego Ridge Rider E-Bike Review
Written by: Nick Cowie | October 5, 2026 | Time to read: 5 min
The Pedego Ridge Rider brings powerful riding to the trail with Class 2 and Class 3 assistance in a hardtail electric mountain bike, providing unlimited adventures on a huge range of terrain.

More about the Author: Nick Cowie
Nick is a writer with seven years of experience in the cycling industry. In his free time, he enjoys swimming, Jiu Jitsu, and spending time outdoors.

👋 Welcome to Upway!
Table of Contents
Pedego Ridge Rider Specification Highlights
The Pedego Ridge Rider is available in two generations, each with its own unique characteristics. The first generation is geared more towards riders who are exclusively looking for off-road capability. The second generation ramps up the versatility aspect, turning it into a multi-surface commuter with integrated utility gear. It also gives the option for Class 3 capability instead of Class 2 only.
Key Specifications:
- Frame: 6061-T6 aluminum alloy sport hardtail geometry (High-Step only on Gen 1 / Accessible Step-Through on Gen 2)
- Fork: RockShox Recon RL or SR Suntour air suspension with 100mm travel (Gen 1) or upgraded 80mm travel thru-axle sport fork paired with a 30mm suspension seatpost (Gen 2)
- Motor: Custom Dapu brushless geared rear-wheel hub motor
- Motor Torque: 60 Nm (Gen 1) to 90 Nm (Gen 2)
- Maximum Assistance: Class 2 throttle and pedal-assist up to 20 mph / 32 km/h (Gen 1 default) or dual Class 2 unlockable to Class 3 pedal-assist up to 28 mph / 45 km/h via authorized dealer software (Gen 2)
- Peak Power: 500W to 749W nominal / 864W maximum peak output (Gen 1) or 750W nominal / 1,200W maximum peak output (Gen 2)
- Battery: Lockable, down-tube integrated 48V, 14Ah pack (672Wh capacity on Gen 1) or fully enclosed, removable 48V, 17.4Ah pack utilizing premium LG cells (835Wh capacity on Gen 2)
- Estimated Range: Up to 56 miles / 90 km (Gen 1) or up to 90 miles / 144 km (Gen 2) per full charge
- Tire Clearance: 27.5" x 2.1" to 27.5" x 2.25" (Gen 1 Maxxis Ardent off-road treads) up to 27.5" x 2.4" (Gen 2 Kenda multi-surface street/trail tires)
- Drivetrain: SRAM GX or Shimano Deore 10-speed performance derailleur system (Gen 1) or Shimano Acera 8-speed mechanical trigger-shift setup (Gen 2)
- Weight: 24.9 kg / 55 lbs (Gen 1 trail build) up to 33.4 kg / 73.7 lbs (Gen 2 fully equipped utility configuration)
What is behind the versatility of the Pedego Ridge Rider?
The Pedego Ridge Rider looks like a hardtail mountain bike. That is accurate, but it is also much more than that. With the ability to commute, equip accessories and cargo, and a comfortable riding position, it becomes a jack of all trades. As the Ridge Rider progressed from its first generation to the second, it became even more versatile.
- Frame: The frame of the Ridge Rider is made with high-strength aluminum, changing its shape between generations. The first generation goes with a high-step hardtail diamond frame that is made ot withstand the forces of the trail. The second generation moves toward utility functionality, going with a step-through design for stability when cargo is involved.
- Compliance: The first generation of the Pedego Ridge Rider comes with a suspension fork, adding 100mm of front travel. It pairs with aggressive and knobby Maxxis Ardent tires, helping to maintain traction on soft dirt and corners. The second generation moves to an 80mm suspension fork and Kenda multi-surface tires to balance MTB capability with commuting versatility.
- Cargo Capability: The increase in cargo capability is possibly the biggest change from the first to second generation of the Ridge Rider. The mountain bike-focused first generation was capable of holding up to 250 pounds, including the rider. For the second generation, that number jumps up to 330 pounds. It is also fitted with metal fenders, a MIK cargo rack, and the ability to handle 100 pounds of gear.

💸 Want to sell your electric bike?
- In case you didn't know yet, you can sell your e-Bike to Upway and get your cash in 3 simple steps.
- Want an estimation -> It takes only 2 minutes to complete this form
What electronic features are on the Ridge Rider?
Unlike a lot of other states, Pennsylvania does not have specific labeling requirements for electric bikes. Many other states require a permanent label in a specific font and size with specific information that must be included. While this is not the case in Philadelphia, having a label is still a good idea since it can help law enforcement validate that your e-Bike is street legal much quicker than without one.
- Drive Unit: As the capability of the Ridge Rider increases from the first generation to the second, so does the power of the motor. The first-generation rear-hub motor puts out up to 750 watts of power, feeding off a 672 Wh battery with up to 60 Nm of torque. The second generation jumps up to a maximum of 1,200 watts and 90 Nm of torque from an 835 Wh battery pack. This helps it handle its Class 3 ability, which can be unlocked in an area where it is legal.
- Assistance Modes: Both generations of the Ridge Rider naturally operate as Class 2 electric bikes. This means that the bike has a throttle and can assist the rider without pedaling up to 20 mph. The throttle has always had a range of assistance settings, but the second generation introduces PedalSense, which monitors speed, cadence, and torque to automatically engage the perfect amount of assistance.
- Integration: Despite the complicated nature of the tech associated with the Ridge Rider, Pedego made sure to display it all in a simple and integrated fashion. The first generation runs a basic display, but the second has a full-color screen over the stem to clearly show all your data. The cockpit also makes it easy to control the integrated headlight and turn signals with simple switches.

Who is the Pedego Ridge Rider for?
The Pedego Ridge Rider is a unique bike because of its evolution. The first generation is for the rider who wants a mountain bike that makes trail riding fun and comfortable. With an upright geometry and trail-focused features, it is more of a hardtail mountain bike than anything else. As we get into the second generation of the bike, the target audience starts to shift. It is still capable on the trail, but is designed more for commuters and riders who care about hauling cargo. It is also much more powerful. Think about what kind of riding you want to do when selecting a Ridge Rider model.
Frequently Asked Questions
Is the Ridge Rider a mountain bike?
Is this a Class 3 e-Bike?
Why did the bike change so much?
Key Takeaways
- Pick your model based on your riding style: Newer isn’t always better for everyone when a bike goes through changes. Anyone who simply wants a mountain bike will probably like the first Ridge Rider better than the second.
- The second generation is powerful: The second generation of the Ridge Rider was designed to go just as fast on any terrain while cargo is involved. That means they bumped it up to a Class 3 e-Bike with a stronger motor.
- Upway is stocked with Pedego bikes: Upway always has Pedego e-Bikes ready to buy. We refurbish used electric bikes, allowing us to sell them to you for a lower price than ever.
MY WISHLIST
Drop Us A Line
We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.


