It’s a charger fault, which means the system has detected a problem with your charger.
Bosch Error 620: What It Means and How to Fix It
Written by: Tom Fortune | November 11, 2026 | Time to read 5 min
Bosch error 620 is a charger fault, so your charger is the place to start. Here’s what to check, and why a genuine Bosch replacement is the way to go.
More about the Author: Tom Fortune
Tom is a Brit living in the French Alps. When he's not creating written and video content for various brands, he's either pedalling or snowboarding around his local mountains. E-Bikes have unlocked the potential for Tom to explore Alpine terrain and get away from the crowded bike parks. He is only too keen to share his knowledge and experience with other riders.

👋 Welcome to Upway!
What Bosch Error 620 Means
In Bosch’s manuals, error 620 is listed as a charger fault. It belongs to Bosch’s older e-Bike systems, such as bikes with Intuvia or Nyon displays.
Bosch suggests a restart for a lot of its codes, but this isn’t one of them. So for once, switching it off and on again won’t save the day. Instead, Bosch recommends replacing the charger and getting in touch with your Bosch e-Bike dealer.
Quick Checks Before You Replace Your Charger
Before you spend money on a new charger, I’d rule out the simple stuff first. It would be a shame to buy one when the real culprit was a faulty wall socket. Bosch’s charger manual says charging problems can come from the wall socket or cable, not just the charger.
- Plug the charger into a different wall socket that you know works.
- Check the cable and plug for cuts, kinks, or any other damage.
- Make sure the charging plug and the socket on your battery are clean and dry.
- Check that the plug is pushed all the way into the battery.
If the error still shows after these checks, follow Bosch’s advice. These steps can also help with other charger problems, so it’s good to remember them. You might be able to borrow a friend’s charger if it is compatible, which is a good way to see whether the error comes back
How to Fix Bosch Error 620

Bosch’s fix for error 620 is to replace the charger, and I’d go through a Bosch e-Bike dealer. The dealer can test the old charger and make sure the new one is right for your system.
Bosch says you should only charge its batteries with approved Bosch eBike chargers. That rules out cheap copies, even if they look exactly the same. A genuine replacement is the safest way to get your bike back on the road. Cheap chargers from unknown brands online aren’t Bosch-approved, so I’d steer clear.
Other Bosch Battery and Charging Codes
Error 620 is one of several Bosch error codes related to your battery and charging. Here’s what Bosch recommends for the ones you’re most likely to see.
| Code | What Bosch Calls It | Bosch's Fix |
|---|---|---|
| 602 | Internal battery fault | Restart the system |
| 605 | Battery temperature error | Switch off and let the battery cool down or warm up |
| 606 | External battery fault | Check the wiring, then restart |
| 610 | Battery voltage error | Restart the system |
| 620 | Charger fault | Replace the charger and contact your dealer |
| 655 | Multiple battery faults | Switch off, remove and reinsert the battery |
For most of these codes, Bosch says to contact your dealer if the problem doesn’t go away.
Buying a Used Bosch E-Bike

Frequently Asked Questions
What does Bosch error 620 mean?
How do I fix Bosch error 620?
Can I use a non-Bosch charger?
Will restarting my bike clear error 620?
Key Takeaways
- Bosch error 620 is a charger fault on Bosch’s older eBike systems.
- Bosch recommends replacing the charger, not restarting the bike.
- Only use approved Bosch e-Bike chargers to charge a Bosch battery.
MY WISHLIST
Drop Us A Line
We’re happy to answer any questions you have or provide you with an estimate. Just send us a message in the form below with any questions you may have.


